Automatic Hydraulic Cylinder Welding Machine

Mobile station

< Get Welding Solution & Price >

akira@haoyucnc.com

caroline@haoyucnc.com

tel:+86-534-5975577 +86-534-5975577

tel:+86-18865822870 Akira +86-19853123369

Caroline +86-19853123368

skype skype: haoyucnc

Factory Factory：Middle Mingjia Road, Qihe Economy
Development Zone, Shandong, China

youtube facebook linkedin skype

Page view：

Automatic Hydraulic Cylinder Welding Machine

Affiliate classification：

Product

Description

Automatic Hydraulic Cylinder Welding Machine

I. Welding Requirement

1. Specification requirements are as follows:

welding single-end of flange or cylinder bottom
hydraulic cylinder length: max 3000mm
hydraulic cylinder diameter: Ф40-Ф300 mm

2. Mainly used in welding hydraulic cylinder circular seam automatically. To guarantee the welding specification is even and uniform, welding seam has good and uniform appearance. It is convenient and reliable to use and the welding quality meets to the requirement.

II. Technical Parameter

Rotary axis rotation speed	0.2-10R/MIN stepless adjustment
Welding current	50-400A, 100% duty cycle
Welding voltage	16-40V
Welding torch adjustment	lifting distance: 100mm
	left-right distance: 100mm
	tilting angle: 25°～ 60°
Air compressor	0.4～0.6MPA
Welding torch oscillating scope adjustment	0～40mm
Welding torch oscillating frequency range	0-30 times/min
Welding Torch standing time on both sides	0-10 seconds
Welding torch standing time in the middle	0-10 seconds
Welding torch pneumatic feeding value	200mm
Tail stock welding torch pneumatic feeding value	150mm

III. Main Feature

1.MAG water-cooled welding torch .

2.Workpiece is positioned by special fixture and pressed by pneumatic thimble. Rotating synchronously. Loading and unloading bracket are mounted under the workpiece.

3.Omron PLC controls the whole machine operation.

4.Welding length, arc igniting &ending time, welding current, welding voltage, welding speed, oscillating frequency, oscillating scope, oscillating time, torch lifting time, lifting distance, lifting times can be all input through the interface.

5.Welding oscillating mechanism is used to weld wide and multi layer seams of hydraulic cylinder.

IV. Equipment Composition

It consists of machine body, rotary axis power mechanism, welding torch oscillating&adjustment mechanism, electric control system, welding power source, etc.

Scaffolding Automatic Welding Machine

5 Axis Automatic Brake Catching Unit Welding Machine

youtube facebook linkedin skype