Automatic Cylinder and Shaft Welding Machine

Mobile station

< Get Welding Solution & Price >

Copyright 2010 JINAN HAOYU CNC MACHINERY CO., LTD    All Rights Reserved.    鲁ICP备20021809号-1



tel:+86-534-5975577    +86-534-5975577

tel:+86-18865822870    Akira    +86-19853123369

        Caroline  +86-19853123368


skype    skype: haoyucnc         whatsappl

Factory    Factory:Middle Mingjia Road, Qihe Economy
Development Zone, Shandong, China

youtube      facebook       linkedin      skype      whatsapp

youtube      facebook       linkedin      skype      whatsapp

Page view

Automatic Cylinder and Shaft Welding Machine

Affiliate classification
Automatic Cylinder and Shaft Welding Machine
I.Welding Requirement
  1. welding single-end of plate flange or cylinder bottom
  2. Length: 298.5mm, 474mm, 400mm
  3. Diameter: according to drawings
  4. Mainly used for welding circular seam of hydraulic cylinder. Welding specification is even and uniform, welding seam has good and uniform appearance. It is convenient and reliable to use and the welding quality meets the requirement.
II. Main Feature
  1. Welding torch is fixed while workpiece is rotating, welding position is horizontal and tilting.
  2. Adopt welded machine body, welding torch and pneumatic tail-stock can be adjusted longitudinally, it can be locked after adjustment.
  3. Workpiece is positioned by chuck, and pressed by pneumatic thimble. Rotating synchronously. Loading and unloading bracket are mounted under the workpiece.
  4. Japan OMRON PLC controls the whole machine operation. 
  5. The welding mode and welding specification can be preset, saved and recalled. It is convenient to modify 
  6. Welding current and welding voltage are controlled by D/A (digital analog). They can be preset and recalled in layer. To realize multi layer continuous welding when the arc does not stop.
  7. Welding torch oscillating mechanism and lifting mechanism are used to weld wide and multi-layer welding seams of hydraulic cylinder.
  8. Load and unload workpiece horizontally, workpiece will be turned over to a titling position and than be welded. 
III.Technical Parameter

Rotary chuck diameter


Maximum distance between chuck and centre


Rotary axis rotation speed: adjustment

0.2-2R/MIN  stepless

Welding current

30-400A, 100% duty cycle

Welding voltage


Welding torch adjustment

lifting distance: 90mm

left-right distance: 90mm

dip angle: 25°~ 60°

air compressor


Welding torch oscillating scope adjustment


Welding torch oscillating frequency range

0-30 times/min

Welding Torch standing time on both sides

0-10 second

Welding torch standing time in the middle

0-10 second

Welding torch pneumatic feeding value


Tail stock welding torch pneumatic feeding amount



Table titling angle

0-60 °

Total power of machine (exclude welding power source)


IV. Machine Composition
It consists of machine body, rotary axis power mechanism, welding torch oscillating&lifting mechanism, welding torch adjustment mechanism, electric control system, welding power source(buyer will prepare), etc.


Corresponding parameter set not found, please add it in property template of background
Previous Article
Next Article

Follow Us

youtube      facebook       linkedin      skype      whatsapp